network

A network is an isolated Layer 2 networking segment. There are two types of networks, project and provider networks. Project networks are fully isolated and are not shared with other projects. Provider networks map to existing physical networks in the data center and provide external network access for servers and other resources. Only an OpenStack administrator can create provider networks. Networks can be connected via routers.

Compute v2, Network v2

network create

Create new network

openstack network create
    [--extra-property type=<property_type>,name=<property_name>,value=<property_value>]
    [--share | --no-share]
    [--enable | --disable]
    [--project <project>]
    [--description <description>]
    [--mtu <mtu>]
    [--project-domain <project-domain>]
    [--availability-zone-hint <availability-zone>]
    [--enable-port-security | --disable-port-security]
    [--external | --internal]
    [--default | --no-default]
    [--qos-policy <qos-policy>]
    [--transparent-vlan | --no-transparent-vlan]
    [--provider-network-type <provider-network-type>]
    [--provider-physical-network <provider-physical-network>]
    [--provider-segment <provider-segment>]
    [--dns-domain <dns-domain>]
    [--tag <tag> | --no-tag]
    --subnet <subnet>
    <name>
–extra-property type=<property_type>,name=<property_name>,value=<property_value>

Additional parameters can be passed using this property. Default type of the extra property is string (‘str’), but other types can be used as well. Available types are: ‘dict’, ‘list’, ‘str’, ‘bool’, ‘int’. In case of ‘list’ type, ‘value’ can be semicolon-separated list of values. For ‘dict’ value is semicolon-separated list of the key:value pairs.

–share

Share the network between projects

–no-share

Do not share the network between projects

–enable

Enable network (default)

Network version 2 only

–disable

Disable network

Network version 2 only

–project <project>

Owner’s project (name or ID)

Network version 2 only

–description <description>

Set network description

Network version 2 only

–mtu <mtu>

Set network mtu

Network version 2 only

–project-domain <project-domain>

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

–availability-zone-hint <availability-zone>

Availability Zone in which to create this network (Network Availability Zone extension required, repeat option to set multiple availability zones)

Network version 2 only

–enable-port-security

Enable port security by default for ports created on this network (default)

Network version 2 only

–disable-port-security

Disable port security by default for ports created on this network

Network version 2 only

–external

Set this network as an external network (external-net extension required)

Network version 2 only

–internal

Set this network as an internal network (default)

Network version 2 only

–default

Specify if this network should be used as the default external network

Network version 2 only

–no-default

Do not use the network as the default external network (default)

Network version 2 only

–qos-policy <qos-policy>

QoS policy to attach to this network (name or ID)

Network version 2 only

–transparent-vlan

Make the network VLAN transparent

Network version 2 only

–no-transparent-vlan

Do not make the network VLAN transparent

Network version 2 only

–provider-network-type <provider-network-type>

The physical mechanism by which the virtual network is implemented. For example: flat, geneve, gre, local, vlan, vxlan.

–provider-physical-network <provider-physical-network>

Name of the physical network over which the virtual network is implemented

–provider-segment <provider-segment>

VLAN ID for VLAN networks or Tunnel ID for GENEVE/GRE/VXLAN networks

–dns-domain <dns-domain>

Set DNS domain for this network (requires DNS integration extension)

–tag <tag>

Tag to be added to the network (repeat option to set multiple tags)

Network version 2 only

–no-tag

No tags associated with the network

Network version 2 only

–subnet <subnet>

IPv4 subnet for fixed IPs (in CIDR notation)

Compute version 2 only

name

New network name

network delete

Delete network(s)

openstack network delete <network> [<network> ...]
network

Network(s) to delete (name or ID)

network list

List networks

openstack network list
    [--sort-column SORT_COLUMN]
    [--sort-ascending | --sort-descending]
    [--external | --internal]
    [--long]
    [--name <name>]
    [--enable | --disable]
    [--project <project>]
    [--project-domain <project-domain>]
    [--share | --no-share]
    [--status <status>]
    [--provider-network-type <provider-network-type>]
    [--provider-physical-network <provider-physical-network>]
    [--provider-segment <provider-segment>]
    [--agent <agent-id>]
    [--tags <tag>[,<tag>,...]]
    [--any-tags <tag>[,<tag>,...]]
    [--not-tags <tag>[,<tag>,...]]
    [--not-any-tags <tag>[,<tag>,...]]
–sort-column SORT_COLUMN

specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

–sort-ascending

sort the column(s) in ascending order

–sort-descending

sort the column(s) in descending order

–external

List external networks

Network version 2 only

–internal

List internal networks

Network version 2 only

–long

List additional fields in output

Network version 2 only

–name <name>

List networks according to their name

Network version 2 only

–enable

List enabled networks

Network version 2 only

–disable

List disabled networks

Network version 2 only

–project <project>

List networks according to their project (name or ID)

–project-domain <project-domain>

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

Network version 2 only

–share

List networks shared between projects

Network version 2 only

–no-share

List networks not shared between projects

Network version 2 only

–status <status>

List networks according to their status (‘ACTIVE’, ‘BUILD’, ‘DOWN’, ‘ERROR’)

Network version 2 only

–provider-network-type <provider-network-type>

List networks according to their physical mechanisms. The supported options are: flat, geneve, gre, local, vlan, vxlan.

Network version 2 only

–provider-physical-network <provider-physical-network>

List networks according to name of the physical network

Network version 2 only

–provider-segment <provider-segment>

List networks according to VLAN ID for VLAN networks or Tunnel ID for GENEVE/GRE/VXLAN networks

Network version 2 only

–agent <agent-id>

List networks hosted by agent (ID only)

Network version 2 only

–tags <tag>[,<tag>,…]

List networks which have all given tag(s) (Comma-separated list of tags)

Network version 2 only

–any-tags <tag>[,<tag>,…]

List networks which have any given tag(s) (Comma-separated list of tags)

Network version 2 only

–not-tags <tag>[,<tag>,…]

Exclude networks which have all given tag(s) (Comma-separated list of tags)

Network version 2 only

–not-any-tags <tag>[,<tag>,…]

Exclude networks which have any given tag(s) (Comma-separated list of tags)

Network version 2 only

network set

Set network properties

openstack network set
    [--extra-property type=<property_type>,name=<property_name>,value=<property_value>]
    [--name <name>]
    [--enable | --disable]
    [--share | --no-share]
    [--description <description]
    [--mtu <mtu]
    [--enable-port-security | --disable-port-security]
    [--external | --internal]
    [--default | --no-default]
    [--qos-policy <qos-policy> | --no-qos-policy]
    [--tag <tag>]
    [--no-tag]
    [--provider-network-type <provider-network-type>]
    [--provider-physical-network <provider-physical-network>]
    [--provider-segment <provider-segment>]
    [--dns-domain <dns-domain>]
    <network>
–extra-property type=<property_type>,name=<property_name>,value=<property_value>

Additional parameters can be passed using this property. Default type of the extra property is string (‘str’), but other types can be used as well. Available types are: ‘dict’, ‘list’, ‘str’, ‘bool’, ‘int’. In case of ‘list’ type, ‘value’ can be semicolon-separated list of values. For ‘dict’ value is semicolon-separated list of the key:value pairs.

–name <name>

Set network name

–enable

Enable network

–disable

Disable network

–share

Share the network between projects

–no-share

Do not share the network between projects

–description <description

Set network description

–mtu <mtu

Set network mtu

–enable-port-security

Enable port security by default for ports created on this network

–disable-port-security

Disable port security by default for ports created on this network

–external

Set this network as an external network (external-net extension required)

–internal

Set this network as an internal network

–default

Set the network as the default external network

–no-default

Do not use the network as the default external network

–qos-policy <qos-policy>

QoS policy to attach to this network (name or ID)

–no-qos-policy

Remove the QoS policy attached to this network

–tag <tag>

Tag to be added to the network (repeat option to set multiple tags)

–no-tag

Clear tags associated with the network. Specify both –tag and –no-tag to overwrite current tags

–provider-network-type <provider-network-type>

The physical mechanism by which the virtual network is implemented. For example: flat, geneve, gre, local, vlan, vxlan.

–provider-physical-network <provider-physical-network>

Name of the physical network over which the virtual network is implemented

–provider-segment <provider-segment>

VLAN ID for VLAN networks or Tunnel ID for GENEVE/GRE/VXLAN networks

–dns-domain <dns-domain>

Set DNS domain for this network (requires DNS integration extension)

network

Network to modify (name or ID)

network show

Show network details

openstack network show <network>
network

Network to display (name or ID)

network unset

Unset network properties

openstack network unset
    [--extra-property type=<property_type>,name=<property_name>,value=<property_value>]
    [--tag <tag> | --all-tag]
    <network>
–extra-property type=<property_type>,name=<property_name>,value=<property_value>

Additional parameters can be passed using this property. Default type of the extra property is string (‘str’), but other types can be used as well. Available types are: ‘dict’, ‘list’, ‘str’, ‘bool’, ‘int’. In case of ‘list’ type, ‘value’ can be semicolon-separated list of values. For ‘dict’ value is semicolon-separated list of the key:value pairs.

–tag <tag>

Tag to be removed from the network (repeat option to remove multiple tags)

–all-tag

Clear all tags associated with the network

network

Network to modify (name or ID)